The goat-shaped A sign is designed to be placed in front of a store or in a passage to attract the attention of passersby. It is made entirely of anodized aluminum with a snap profile poster board of 32mm and decorative corners on both sides. Typically, these stoppers are made in B2 and B1 formats, but upon request of customers, it is possible to order boards of smaller or larger dimensions.
Street PVC-forex advertising board is an extremely attractive solution that can be shaped according to the customer's needs (e.g. in the shape of a soda as shown in the picture), achieving an additional effect and attractiveness for potential customers. The lower part consists of a strong and heavy steel base that provides stability, while the upper part is made of thick 15mm PVC (forex) coated with laminated foil. The foil is produced in multiple colors according to a pre-prepared design as desired by the customer.
It is standardly produced in B2 format (500 x 700 mm), and the height of the entire board is around 720mm. The advertising board is primarily intended for outdoor use.
Wind-resistant and 100% waterproof portable street advertising. It is designed for places where the use of traditional A-boards is not cost-effective, the new product in our offer WINDMASTER will neutralize strong wind impacts and its special waterproof design will stop moisture influence. The waterproofness of this product is achieved by placing special rubber on the inner side of WINDMASTER, ensuring a longer lifespan of the poster.
Sandwich table concepts are very similar to classic A-board displays, but they differ in the position of the board, which is designed here to directly appeal to the customer. They can be single-sided or double-sided. We typically produce them in B1 and B2 formats.
The standing poster board, called an open variation, is a more economical option than the board presented above. It differs in that the posts only go up to half the frame, they do not enclose the frame as in the case above. The height of the element is 175cm, it is standardly produced in B2 and B1 formats and can be single-sided or double-sided. Other dimensions may be available upon request.
A free-standing poster board with two legs represents the ideal solution for placing posters and notices in a space, especially in cases where it is not possible to drill walls or if the location for the poster is temporary. The two-legged option is an economical solution intended for framing posters. Unlike other boards in this group, frames for 25mm posters are mounted on these boards, which are cheaper compared to frames made for 32mm profiles that are mounted on other boards in the group of poster boards. The main advantage is the easy mobility and positioning of the boards where needed. They are typically made in B2 and B1 formats and can be single or double-sided. The height of the element depends on the type of poster it is intended for, ranging from 165cm to 180cm.
In order to enrich our selection of street advertisements, we have included a new movable street SWING ad panel in our range. This advertising board is designed for customers who do not need to frequently change their advertising message but want to stand out not only with an original advertising message but also with the appearance of the advertising panel. The ad is made of a plastic base that can be filled with water or sand, a steel frame, and a printed advertising board made of 2mm thick alubond with direct UV printing. The size of the advertising board is 500mm x 750mm and it can be easily replaced. You can order a replacement board with graphics independently from the board.